Super Hydrophilic Polymer Filtration Membrane
In the past, rural drinking water generally used hand pumps to draw groundwater or river water from the bottom of small wells dug manually . The hand pump performs reciprocating motion through the handle, which has a compact structure, reliable quality, stable performance and easy movement .


Working Process
Installation diagram
Follow the hand pump (or electric pump) and the water purifier according to the schematic
* Pay Attention:
* Note: 1. It is better to install check valve at the bottom of pump inlet pipe
2. Before entering the water, make sure that the filter membrane flange screws are tightened. (The screws may also be loose during transportation)
*Working process
Start the hand pump or electric pump and pump water into the water tank.
2. Until the water is full, stop shaking the hand pump or turn off the power.
3. Turn on the water purification tap to get clean drinking water (mineral water level)


UF membrane
Layer 1 : Outer screen type protective housing, UPVC/OPVC cage with 1-2mm gap size.
Layer 2 : The microfiltration layer is ultra-hydrophilical PP cotton, the average aperture size of the microfiltration layer is between 2 to 200 micron.
Layer 3: The carbon fiber adsorption layer is made up of antibacterial modified carbon fiber in diameter range from 1 to 100um.
Layer 4: Outer screen type protective housing , UPVC/OPVC cage with 1-2mm gap size.
Layer 5: The ultrafiltration membrane filter layer may be polyfluoroethylene, polyurethane, polyether, polyvinyl chloride or poly-acrylic


Water Tank
The water filter tank is equipped with a gravity water purification, it includes the ultrafiltration filter, which is screwed near the side, and there is a water tap at membrane module cover, which is fixed outside of the receiver tank.
As a preference, one side of the tank is equipped with a level control valve for the water level control, and the level control valve is equipped with a float for detecting the level. Besides, the height of the float is 2 to 8 times the outer diameter of the membrane module, here select 1-2m for running. As a preference, the bottom of the tank is equipped with a discharge valve for the removal of residual dirt mud.
Specification
ITEM | SPECIFICATION |
UF membrane | Pressureless ultrafiltration membrane |
Housing material | ABS + UPVC |
Membrane material | Super hydrophilic polymer |
Nominal pore size | 0.02 um |
Flow rate | 400~600L/hr ( at 1.0m ~2.0mwater level) |
Water Tank | PE Tank, water level 1.5~2m is the best |
Module lifespan | 2years |

